hydrogen peroxide

hydrogen peroxide

● Hydrogen peroxide is a mass-produced chemical in the pulp and paper industry
and in the textile, pharmaceutical, cosmetics, electronics and chemical industries for oxidizing and bleaching
is used.
● Environmentally friendly alternative to chlorine.
● Neutralizes dangerous pollutants from industrial waste and waste water streams.
● The most common way to produce hydrogen is by an auto-oxidation process in
is used where a working solution (usually Alkylchinon in an organic solution), then
the peroxide extracted by contact with deionized water.
● Hydroalkylchinon is formed by the reduction of Alkylchinon with hydrogen in a reactor.
● The produced Hydroalkylchinon undergoes a series of filtration steps to remove impurities
and to regenerate the valuable catalyst.
● The Hydroalkychinon is then fed into an oxidation reactor, the air is supplied, whereby
Hydrogen peroxide is formed.
● hydrogen peroxide is then separated from the organic phase in a water separator, a
to obtain 35-45% hydrogen peroxide solution.
● Alkylchinon is then purified and recycled back to the hydrogenation reactor.
● peroxide is treated to remove organic impurities, so that the desired
Concentration of the final product is achieved.
● Then the peroxide is loaded in tank wagons or in casks and thus be ready.


suitable products

● Primary catalyst recovery: Renewable backwash filters offer advantages in the
Procedural economy; provide a reliable filtration, reduced maintenance and a reduction in
Problems in material handling.
● Secondary and tertiary catalyst recovery: candle filters are used to the catalyst
remove, so as to ensure the safety of downstream processes.
● Water Filtration: Jumbo filters are used to remove impurities such as iron oxide to
Remove and increase product quality. The purity of the final product through the use of
maximizes clean Extraktowasser from which the product was manufactured.
● removal of the aqueous phase from the working solution: coalescer serve the quantitative removal
of free water to up to 15 ppm.
● regeneration filters: These will be recommended to a 10% volume flow from the working solution
filter and remove absorbent that can contaminate the flow. the filters
ensure reproducible quality of the liquid and a longer life. thereby
Exchange of filter elements and application minimizes exposure to toxic media.
● filtration of the final product: hydrogen may be in various stages and concentrations
are shipped (5-70%). Before shipping the final product is stored in storage tanks. The
End use of the product determines the requirements for filtration. For less critical
Requirements for filtration (retention rates of 2-20 microns), we recommend the filter of HFGP series. For
stricter requirements are the filters of the PVDF series best.

markets

hydrogen peroxide

Feedback

Related Applications

PREV:No Content