PO / PE series: filter bag from fully welded needle felt


Fully welded filter bag needle felt of Feature Tec offer a high level of filtration efficiency and seal. These filter bags are manufactured using modernster technologies.

applications:
● paints and varnishes
● Cathodic Tauchlalckierungen
● lubricating and hydraulic oils
● chemicals
● inks
● edible oils and fruit juices
● solvent
● Water and more
Features and benefits:
● Available in three different plastic sealing rings, which is common to each
Bag filter housing adapt (see pictures below).
● Fully welded construction with plastic seal ring allows for nearly 100% bypass-free
Filtration.
● material is free from paint-interfering substances (such as silicones, etc.) 1 *.
● Special surface treatment of the outflow significantly reduces fiber migration.
● Optional also available for food applications.
Filter specifications:
Materials:
Polypropylene needle felt
Polyester needle felt
sealing ring:
Welded plastic seal ring made of polypropylene or polyester
deposition:
1, 5, 10, 25, 50, 100, 200 microns
dimensions / parameters:
Sizes: 01: Ø 178 x 420 mm
02: Ø 178 x 810 mm
03: Ø 102 x 230 mm
04: 102 x 410 mm Ø
filter surfaces:
01: 0.24 m
02: 0.48 m
03: 0.08 m
04: 0.16 m
Maximum differential pressure 2 *:
2.5 bar
Recommended pressure when filter change 3 *:
≈ 0.8 to 1.5 bar
Maximum operating temperatures:
Polypropylene: <90 ° C
Polyester: <140 ° C
Maximum flow rate 4 *:
01: 20 m³ / h
02: 40 m³ / h
03: 6 m³ / h
04: 12 m³ / h
deposition:



plastic sealing rings:



Ordering:



1 * Based on an approved paint compatibility test.
2 * Maximum differential pressure for bags receiving basket (tested at Flüssikgieten under
Filtration conditions).
3 * Depending on the requirements of each application.
4 * For liquids with a dynamic viscosity of 1 mPa ∙ s @ 20 ° C.

Feedback

Related Applications