PEMU series: Filterbeutel from poly ester multifilament


Multifilament filter bag of Feature Tec available are ideal for surface filtration and in a variety of deposition. This filter bag separate effectively from Partikal that are larger than the respective pore size. But they have no "absolute" retention rate.

applications:
● water treatment
● paints and varnishes
● printing inks
● inks
● resins
● chemicals
● solvents and more
Features and benefits:
● constructed from multiple woven fibers which ensure the strength of the filter bag,
but at the same cost.
● sealing ring available in stainless steel.
● material is free from paint-interfering substances (such as silicones, etc.) 1 *.

Filter specifications:
Material:
Polyester multifilament
sealing ring:
Stitched sealing ring made of stainless steel
deposition:
100, 125, 150, 175, 200 microns
dimensions / parameters:
Sizes: 01: Ø 178 x 420 mm
02: Ø 178 x 810 mm
filter surfaces:
01: 0.24 m
02: 0.48 m
Maximum differential pressure 2 *:
2.5 bar
Recommended pressure when filter change 3 *:
≈ 0.8 to 1.5 bar
Maximum operating temperatures:
Polyester: <140 ° C
Maximum flow rate 4 *:
01: 20 m³ / h
02: 40 m³ / h
deposition

Ordering:


1 * Based on an approved paint compatibility test.
2 * Maximum differential pressure for bags receiving basket (tested at Flüssikgieten under
Filtration conditions).
3 * Depending on the requirements of each application.
4 * For liquids with a dynamic viscosity of 1 mPa ∙ s @ 20 ° C.

Feedback

Related Applications

PREV:No Content