NMO series: filter bag made of nylon monofilament

Monofilament filter bag of Feature Tec available are ideal for surface filtration and in a variety of deposition. This filter bag effectively divorced from particles that are larger than the respective pore size.

applications:
● coating and degreasing in the automotive industry
● Cutting Fluids
● resins
● chemicals
● solvent
● recycled water and more

Features and benefits:
● Heat stabilized to prevent deformation.
● Reinforced side and bottom seams to prevent bypass needle stick (for
Deposition ≤ 125 microns).
● Available in three different plastic gaskets and stainless steel ring, which in itself
any common bag filter housing adapt (see pictures below).

Filter specifications:
Materials:
Nylon monofilament
O-rings:
Welded plastic seal ring made of polypropylene
Stitched sealing ring made of stainless steel
deposition:
5, 10, 25, 75, 100, 125, 150, 175, 200, 250, 300, 400, 600, 800, 1000, 1250 .mu.m
dimensions / parameters:
Sizes: 01: Ø 178 x 420 mm
02: Ø 178 x 810 mm
03: Ø 102 x 230 mm
04: 102 x 410 mm Ø
filter surfaces:
01: 0.24 m
02: 0.48 m
03: 0.08 m
04: 0.16 m
Maximum differential pressure 2 *:
2.5 bar
Recommended pressure when filter change 3 *:
≈ 0.8 to 1.5 bar
Maximum operating temperatures:
Nylon: <170 ° C
Maximum flow rate 4 *:
01: 20 m³ / h
02: 40 m³ / h
03: 6 m³ / h
04: 12 m³ / h
deposition:

plastic sealing rings:

Ordering:

1 * Based on an approved paint compatibility test.
2 * Maximum differential pressure for bags receiving basket (tested at Flüssikgieten under
Filtration conditions).
3 * Depending on the requirements of each application.
4 * For liquids with a dynamic viscosity of 1 mPa ∙ s @ 20 ° C.

Feedback

Related Applications

NEXT:No Content